20210912, 14:52  #221  
"Ben"
Feb 2007
110111111010_{2} Posts 
Quote:
The problem is that this value is set really big when avxecm is available during compilation. I need to add a check that it is also available at runtime... Quote:
Put the v's on separate lines in the .ini file. Each line is interpreted as one option. 

20210912, 18:43  #222  
"James Heinrich"
May 2004
exNorthern Ontario
3,499 Posts 
Quote:
This wasn't obvious to me, perhaps an amendment to the .ini file to make that clearer would help. 

20210912, 18:57  #223 
"Oliver"
Sep 2017
Porta Westfalica, DE
3×5×43 Posts 
On my installations, I always use prefer_gmpecm and this works as intended, also with 2.06.

20210912, 19:01  #224  
"Ben"
Feb 2007
2·1,789 Posts 
Quote:
Yes I'll add some text to the .ini file description. 

20210912, 19:11  #225 
"Ben"
Feb 2007
2×1,789 Posts 

20210913, 13:06  #226  
Aug 2020
79*6581e4;3*2539e3
2×199 Posts 
edit: I saw this was reported earlier and should be fixed?
I pulled the newest version and did a make clean and make NFS=1 USE_SSE41=1 USE_AVX2=1 and building quits with the following error: Quote:
Do you know why I still run into the problem? Last fiddled with by bur on 20210913 at 13:11 

20210913, 13:38  #227 
"Ben"
Feb 2007
2·1,789 Posts 

20210914, 01:05  #228 
"James Heinrich"
May 2004
exNorthern Ontario
6653_{8} Posts 
I wouldn't have noticed this except for some error checking in my automated parsing of factor.log
Code:
09/13/21 08:12:06, **************************** 09/13/21 08:12:06, Starting factorization of 11745986472276496655662247734956521108703066873589956247227553585499089637967910706104797828678082669016193648910144450016469882935490998359642649527365479 09/13/21 08:12:06, using pretesting plan: deep 09/13/21 08:12:06, using specified qs/gnfs crossover of 100 digits 09/13/21 08:12:06, using specified qs/snfs crossover of 75 digits 09/13/21 08:12:06, **************************** 09/13/21 08:12:06, rho: x^2 + 3, starting 1000 iterations on C155 09/13/21 08:12:06, prp5 = 91291 09/13/21 08:12:06, rho: x^2 + 3, starting 1000 iterations on C150 09/13/21 08:12:06, prp7 = 7805879 09/13/21 08:12:06, rho: x^2 + 3, starting 1000 iterations on C143 09/13/21 08:12:06, rho: x^2 + 2, starting 1000 iterations on C143 09/13/21 08:12:07, rho: x^2 + 1, starting 1000 iterations on C143 09/13/21 08:12:07, pm1: starting B1 = 150K, B2 = gmpecm default on C143 09/13/21 08:12:07, current ECM pretesting depth: 0.00 09/13/21 08:12:07, scheduled 30 curves at B1=2000 toward target pretesting depth of 47.67 09/13/21 08:12:07, Finished 30 curves using GMPECM method on C143 input, B1=2k, B2=gmpecm default 09/13/21 08:12:07, current ECM pretesting depth: 15.18 09/13/21 08:12:07, scheduled 74 curves at B1=11000 toward target pretesting depth of 47.67 09/13/21 08:12:10, Finished 74 curves using GMPECM method on C143 input, B1=11k, B2=gmpecm default 09/13/21 08:12:10, current ECM pretesting depth: 20.24 09/13/21 08:12:10, scheduled 214 curves at B1=50000 toward target pretesting depth of 47.67 09/13/21 08:12:11, prp26 = 23304102950704118347000297 (curve 2 stg2 B1=50000 sigma=3874399757 thread=1) 09/13/21 08:12:11, Finished 4 curves using GMPECM method on C143 input, B1=50k, B2=gmpecm default 09/13/21 08:12:11, current ECM pretesting depth: 20.34 09/13/21 08:12:11, scheduled 210 curves at B1=50000 toward target pretesting depth of 39.00 09/13/21 08:12:22, Finished 210 curves using GMPECM method on C117 input, B1=50k, B2=gmpecm default 09/13/21 08:12:22, pm1: starting B1 = 3750K, B2 = gmpecm default on C117 09/13/21 08:12:23, current ECM pretesting depth: 25.33 09/13/21 08:12:23, scheduled 430 curves at B1=250000 toward target pretesting depth of 39.00 09/13/21 08:13:47, Finished 430 curves using GMPECM method on C117 input, B1=250k, B2=gmpecm default 09/13/21 08:13:47, pm1: starting B1 = 15M, B2 = gmpecm default on C117 09/13/21 08:13:50, current ECM pretesting depth: 30.45 09/13/21 08:13:50, scheduled 904 curves at B1=1000000 toward target pretesting depth of 39.00 09/13/21 08:25:10, Finished 904 curves using GMPECM method on C117 input, B1=1M, B2=gmpecm default 09/13/21 08:25:10, current ECM pretesting depth: 35.56 09/13/21 08:25:10, scheduled 1619 curves at B1=3000000 toward target pretesting depth of 39.00 09/13/21 08:31:42, prp35 = 10458847902056956740364765053965417 (curve 195 stg2 B1=3000000 sigma=2620919999 thread=0) 09/13/21 08:31:49, Finished 197 curves using GMPECM method on C117 input, B1=3M, B2=gmpecm default 09/13/21 08:31:49, final ECM pretested depth: 35.98 09/13/21 08:31:49, prp84 cofactor = 67627522805179106773859180025103681923504306209525858835440580638970766947677849939 09/13/21 08:31:49, Total factoring time = 1183.1567 seconds prp84 cofactor = 67627522805179106773859180025103681923504306209525858835440580638970766947677849939 That number is only 83 characters long, but claims to be a prp84. For comparison, this is what it shows on v1.34.5: Code:
09/13/21 20:25:23 v1.34.5 @ 3930K, **************************** 09/13/21 20:25:23 v1.34.5 @ 3930K, Starting factorization of 11745986472276496655662247734956521108703066873589956247227553585499089637967910706104797828678082669016193648910144450016469882935490998359642649527365479 09/13/21 20:25:23 v1.34.5 @ 3930K, using pretesting plan: deep 09/13/21 20:25:23 v1.34.5 @ 3930K, using tune info for qs/gnfs crossover 09/13/21 20:25:23 v1.34.5 @ 3930K, **************************** 09/13/21 20:25:23 v1.34.5 @ 3930K, rho: x^2 + 3, starting 1000 iterations on C155 09/13/21 20:25:23 v1.34.5 @ 3930K, rho: x^2 + 2, starting 1000 iterations on C155 09/13/21 20:25:23 v1.34.5 @ 3930K, prp5 = 91291 09/13/21 20:25:23 v1.34.5 @ 3930K, rho: x^2 + 2, starting 1000 iterations on C150 09/13/21 20:25:23 v1.34.5 @ 3930K, prp7 = 7805879 09/13/21 20:25:23 v1.34.5 @ 3930K, rho: x^2 + 2, starting 1000 iterations on C143 09/13/21 20:25:23 v1.34.5 @ 3930K, rho: x^2 + 1, starting 1000 iterations on C143 09/13/21 20:25:23 v1.34.5 @ 3930K, pm1: starting B1 = 150K, B2 = gmpecm default on C143 09/13/21 20:25:23 v1.34.5 @ 3930K, current ECM pretesting depth: 0.00 09/13/21 20:25:23 v1.34.5 @ 3930K, scheduled 30 curves at B1=2000 toward target pretesting depth of 47.67 09/13/21 20:25:23 v1.34.5 @ 3930K, Finished 30 curves using Lenstra ECM method on C143 input, B1=2K, B2=gmpecm default 09/13/21 20:25:23 v1.34.5 @ 3930K, current ECM pretesting depth: 15.18 09/13/21 20:25:23 v1.34.5 @ 3930K, scheduled 74 curves at B1=11000 toward target pretesting depth of 47.67 09/13/21 20:25:27 v1.34.5 @ 3930K, Finished 74 curves using Lenstra ECM method on C143 input, B1=11K, B2=gmpecm default 09/13/21 20:25:27 v1.34.5 @ 3930K, current ECM pretesting depth: 20.24 09/13/21 20:25:27 v1.34.5 @ 3930K, scheduled 214 curves at B1=50000 toward target pretesting depth of 47.67 09/13/21 20:25:35 v1.34.5 @ 3930K, prp26 = 23304102950704118347000297 (curve 22 stg2 B1=50000 sigma=3377483298 thread=2) 09/13/21 20:25:35 v1.34.5 @ 3930K, Finished 132 curves using Lenstra ECM method on C143 input, B1=50K, B2=gmpecm default 09/13/21 20:25:35 v1.34.5 @ 3930K, current ECM pretesting depth: 23.33 09/13/21 20:25:35 v1.34.5 @ 3930K, scheduled 82 curves at B1=50000 toward target pretesting depth of 39.00 09/13/21 20:25:39 v1.34.5 @ 3930K, Finished 84 curves using Lenstra ECM method on C117 input, B1=50K, B2=gmpecm default 09/13/21 20:25:39 v1.34.5 @ 3930K, pm1: starting B1 = 3750K, B2 = gmpecm default on C117 09/13/21 20:25:41 v1.34.5 @ 3930K, current ECM pretesting depth: 25.34 09/13/21 20:25:41 v1.34.5 @ 3930K, scheduled 430 curves at B1=250000 toward target pretesting depth of 39.00 09/13/21 20:27:04 v1.34.5 @ 3930K, Finished 432 curves using Lenstra ECM method on C117 input, B1=250K, B2=gmpecm default 09/13/21 20:27:04 v1.34.5 @ 3930K, pm1: starting B1 = 15M, B2 = gmpecm default on C117 09/13/21 20:27:10 v1.34.5 @ 3930K, current ECM pretesting depth: 30.46 09/13/21 20:27:10 v1.34.5 @ 3930K, scheduled 904 curves at B1=1000000 toward target pretesting depth of 39.00 09/13/21 20:30:19 v1.34.5 @ 3930K, prp35 = 10458847902056956740364765053965417 (curve 40 stg2 B1=1000000 sigma=886406094 thread=1) 09/13/21 20:30:19 v1.34.5 @ 3930K, Finished 240 curves using Lenstra ECM method on C117 input, B1=1M, B2=gmpecm default 09/13/21 20:30:19 v1.34.5 @ 3930K, final ECM pretested depth: 31.78 09/13/21 20:30:19 v1.34.5 @ 3930K, scheduler: switching to sieve method 09/13/21 20:30:19 v1.34.5 @ 3930K, prp83 = 67627522805179106773859180025103681923504306209525858835440580638970766947677849939 09/13/21 20:30:19 v1.34.5 @ 3930K, Total factoring time = 296.4042 seconds 
20210914, 12:31  #229  
Aug 2020
79*6581e4;3*2539e3
2×199 Posts 
Quote:


20210915, 01:19  #230  
"Ben"
Feb 2007
2·1,789 Posts 
2.07 now available
Quote:
I verified the latest commits made it to github, we are now at 2.07. In this version I've committed changes to the MSVC project files and linux makefile that revert back to the "normal" directory structure of yafu and its dependencies (no more ".git" or "trunk" in the relative paths of libraries). And removed some confusing stuff in the makefile. Hopefully working toward something that is easier to build. Two other things of note: 1) I was made aware that aprcl wasn't running on factors found, this is now fixed and factors displayed to screen should now be "P" instead of "PRP" 2) AVXECM below 1040 bits is about 10% faster. Regarding the "P" vs. "PRP" labeling... the .log file still generally gets "prp" printed. Which could be fixed, but before I do that I wanted to see if that would break anyone's scripting/parsing? 

20210915, 10:41  #231  
"James Heinrich"
May 2004
exNorthern Ontario
3,499 Posts 
Quote:
We already have to handle the different format for small factors: div: found prime factor = 3 Possibly this could be changed to standardize it such that all factors follow the format (pprpc)<len> = <factor> 

Thread Tools  
Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
yafu ignoring yafu.ini  chris2be8  YAFU  6  20191017 16:22 
Running YAFU via Aliqueit doesn't find yafu.ini  EdH  YAFU  8  20180314 17:22 
YAFU1.34  bsquared  YAFU  119  20151105 16:24 
Yafu bug.  storflyt32  YAFU  2  20150629 05:19 
yafu 1.32  bsquared  YAFU  28  20120720 16:17 